- What else do I need?
- You need a small compressor with a regulator,
which has a minimum 6-cfm capacity, a 1/2 inch drill with a mixing
paddle and cold water. Water is used to mix the Smoktite and to
clean up.
- What preparation of the smoke chamber is required
prior to application?
- A thorough brushing and/or rotary cleaning will
usually suffice.
- Does the equipment clean up easily?
- Yes! Clean up with water is easy when done promptly
after each use.
- Once mixed, how long do I have to use it?
- About one hour.
- Has it been tested?
- Yes! It has been tested to 3000ºF. It is a highly
insulative and lightweight agglomerate.
|
- What kind of coverage will I get with Smoktite?
- One bucket will cover approximately 10 square
feet at 1/2 inch thick.
- How many coats does it take to complete a smoke
chamber?
- Usually, 1 to 2 coats. Additional coats may be
necessary for severe problems.
- How long do I have to wait between coats?
- If multiple coats are necessary, approximately
10-15 minutes is recommended. This is variable depending on temperature
and humidity.
- Will it seal holes?
- Yes! It can seal holes up to 1inch with a single
coat.
- How does Smoktite compare to other products and
methods?
- Smoktite is a unique product. It is a sprayable
ceramic making it quick and easy to apply!
|
