Ventech About Us Directions Contact Us News Order

SMOKE CHAMBER & SMOKTITE
FREQUENTLY ASKED QUESTIONS

Read and understand all instructions before starting!

	Is there a Technical Data Sheet for Smoktite?
	Technical Data Sheet is available here in PDF format.
	Is there a warranty for Smoktite?
	Warranty information is available here in PDF format.
	What else do I need?
	You need a small compressor with a regulator, which has a minimum 6-cfm capacity, a 1/2 inch drill with a mixing paddle and cold water. Water is used to mix the Smoktite and to clean up.
	What preparation of the smoke chamber is required prior to application?
	A thorough brushing and/or rotary cleaning will usually suffice.
	Does the equipment clean up easily?
	Yes! Clean up with water is easy when done promptly after each use.
	Once mixed, how long do I have to use it?
	About one hour.
	Has it been tested?
	Yes! It has been tested to 3000慚. It is a highly insulative and lightweight agglomerate.
	What kind of coverage will I get with Smoktite?
	One bucket will cover approximately 10 square feet at 1/2 inch thick.
	How many coats does it take to complete a smoke chamber?
	Usually, 1 to 2 coats. Additional coats may be necessary for severe problems.
	How long do I have to wait between coats?
	If multiple coats are necessary, approximately 10-15 minutes is recommended. This is variable depending on temperature and humidity.
	Will it seal holes?
	Yes! It can seal holes up to 1inch with a single coat.
	How does Smoktite compare to other products and methods?
	Smoktite is a unique product. It is a sprayable ceramic making it quick and easy to apply!

NEWS AT VENTECH

Ventech Industries, Inc. - 384 Harold L. Dow Highway - Eliot, Maine 03903 - 866-439-0069 - info@ventechindustries.com